All Mevo cameras offer advanced internal audio and several options for external audio sources. The Mevo app allows you to control each input individually or as a whole using the Audio Mixer feature.
Controlling Mevo Audio
To access the Audio Mixer, tap the More Options (•••) icon in the lower right corner of the live edit view.
Then tap the microphone icon on the left side of the panel to enter the Audio Mixer.
Output
The Output slider (section 2) controls what your audience hears. Any adjustments to section 1 will directly affect the Output.
- The Output section includes a volume slider, mute button, and audio level meter. It controls the final mix sent to your audience.
- Below that, you’ll see individual controls for each input source, including your Mevo’s built-in mic and your mobile device’s mic or plugged-in source. Use the sliders to adjust volume, or tap the microphone icon to mute a source.
A general best practice is to keep audio levels peaking between halfway and two-thirds up the bar. This ensures clarity without distortion.
If the level meter flashes red at the top, your audio is peaking. Lower the volume using the slider to avoid distortion.
Mevo Audio Inputs
To view and manage all connected inputs, tap Edit Inputs in the Audio Mixer. This displays all available sources, including network-based audio (e.g., the Mevo Mic App) and physical sources like USB audio.
All detected and connected sources will appear in this list.
Learn more about audio input options for Mevo Start
Learn more about audio input options for Mevo 1/Plus
Unique Audio Settings
Each Mevo model has its own advanced audio features. Select your model below for details.
Mevo Start Audio Processing Options
Tap the arrow next to your Mevo Start input in the Audio Mixer to access advanced audio processing settings.
Audio Processing Modes
- General – Balanced for speech and music. Includes minimal noise and reverb reduction.
- Music – Designed for capturing a full frequency range. No noise reduction applied.
- Speech – Uses beam-forming for high speech clarity and reduces noise from behind the camera.
- Wind – Reduces wind interference using all 3 mics to filter out wind noise.
Auto Gain Control (AGC)
AGC automatically adjusts input volume to maintain consistent levels.
- Music – AGC adjusts slowly to preserve audio balance.
- Speech – AGC adjusts quickly to ensure vocal clarity.
Mevo 1st Gen / Mevo Plus Audio Processing Options
For best results, place your Mevo close to your subject (about five feet). The directional mic focuses on what’s in front of the camera.
Then tap the gearwheel to open settings.
Navigate to Audio & Video.
-
Audio Enhancements: Toggle this on to access modes like:
- Music – Adds filtering and compression to prevent peaking.
- Speech – Adds a low pass filter for clarity, plus optional Noise Cancellation.
- Mic Pad: Reduces decibels of loud inputs to prevent distortion.
- Echo Suppression: Helps eliminate feedback when using the mobile mic or headphones (iOS only).
-
Mix All Channels: When using a USB audio input, this merges mono or stereo input across both channels.
Mix Audio Channel ON:
- Mono – Duplicates left/right for stereo effect
- Stereo – Both channels are combined across left/right
Mix Audio Channel OFF:
- Mono – Audio only plays in one channel
- Stereo – Audio remains in original stereo format
Troubleshooting Steps
Open Ticket