Mevo Start: Audio Inputs

The Mevo Start camera has a wide variety of solutions when it comes to external audio. We cover all of these solutions below, or if you want you can use the internal 3 MEMS Microphone Array. You can even utilize most external solutions simultaneously with the internal microphone.

3.5mm TRS USB-C Mevo Mic App

The Mevo Start camera only accepts TRS!

trs.jpg

When you connect your 3.5mm TRS cable ,your audio source will then reflect "AUX" with a Line Level and Mic Level toggle.
Image_from_iOS__1__051021_052245_PM.jpg

Line Level Mic Level
3.5mm, TRS 3.5mm, TRS
Stereo Mono
Nominal level: -12dBv Pre-Amp gain: 24.5 or 27.8dB
Maximum peak-to-peak voltage: 0.7V  
Frequency response: 30Hz to 20kHz

When you use the cameras 3.5mm TRS input you can use other audio sources simultaneously. 

The camera does not provide any phantom power so if your device requires power it must be provided by a third party device.

Cross Compatibility

The camera can accept many sources of audio simultaneously. The only two sources of audio that can't be used simultaneously is the 3.5mm TRS port and internal microphones. You can only use one or the other. If you have a 3.5mm input your internal microphones will be disabled and when you unplug the 3.5mm input they will automatically be re-enabled.

Troubleshooting Steps

Still having an issue?
Please open a support ticket here so a Customer Experience Agent can address this for you.
Open Ticket
Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.