The Settings for the Multicam app currently include Transition Type, Camera Input Quality, Crop Settings, and Video Source Latency. To learn all about Camera-Assistant click here. In addition, you can find your app version number in About and contact Mevo Support directly from the app in Support.
To access the Settings in the Multicam app tap the 3 dots in the bottom right of the main screen as shown below:
The Cut option will instantly switch from one camera to the other:
You can specify how fast you want this transition to take by selecting the gear icon and then using the slider to select between 0.1s (very fast fade) all the way to 16.0s (very slow fade).
Camera Input Quality is not your stream resolution, however, your selection will be the max quality that you can stream with.
Editing Here you can set your maximum Zoom size as well as the default level of Zoom for single tapping on a location. You can set this to be between 1.2X and 3X Zoom.
Action Menu Set the time it takes for the Action Menu to appear when holding down on a specific Zoom location. If you use the Action Menu often to Cut, Slow, or Fast Transition between Zoom locations you may want to lower this all the way to 0.2sec, if you use this feature less you may want to increase the delay up to 2sec.
Customize the Slow Transition (Turtle Icon) from the current position to the selected position between 10sec and 60sec.
Customize the Fast Transition (Rabbit Icon) from the current position to the selected position between 1sec and 10sec.