Mevo Studio: Setup and Stream to sidelineHD

Setting Up sidelineHD for use with Logitech Mevo Studio App.

Follow these steps to configure your Logitech Mevo Studio App with sidelineHD.

1. Power up your Mevo device by pressing and holding the power button for three seconds. The white LED lights will pop on and then start blinking as it initializes.
2. Navigate to your sidelineHD STREAMING tab on the device you will use to run your Mevo.
3. Click the ADD CAMERA (if new) or EDIT CAMERA button and select Mevo.
   
4. Click the Logitech Mevo Studio App button.
    

5. Click the Pair with Mevo Studio App button.
    

   NOTE

   If you're a first-time user you will get many prompts for approval. When prompted, make sure you click yes, agree, install, download, etc.

6. After a successful setup with the Logitech Mevo Studio App you'll see this screen.  Click the blue LAUNCH Studio APP button.
   
    

Setup Logitech Mevo Studio App for use with sidelineHD 

1. Mevo Studio should automatically detect your cameras; if not, you can add a camera by clicking the + button on the bottom left hand of the screen.
2. Click the SETUP button and select your Wi-Fi or Mevo Access Point.
   1. Choose Yes, I have Wi-Fi If you have a stand alone Hotspot / MiFi, or plan to use a personal hotspot from a different cell phone.  Proceed to select the WiFi from the list of available WI-FI networks.
   2. Choose No, I do not have Wi-Fi If you do not have a HotSpot to use, this will use Cellular Data (this will use your phone's data plan).  A password is not required and you can SKIP Password if you like.
      
       
3. Follow these steps to go live (the steps are noted in the picture below):
    
   1. Click the LIVE Button
   2. Select RTMP (Do not select Facebook, YouTube or Twitter).
   3. Choose the sidelineHD logo.
   4. Set resolution to 720p or lower. 
   5. Press the GO LIVE button.
      

If everything is working correctly, you should receive a UP text message from sidelineHD within 30 seconds.