Mevo Start Firmware Recovery

Warning - Not for the Mevo Plus/First Gen

Attempting to use this with your Mevo Plus/1 could damage the unit. You can find their respective article here.

We have a process to help users recover their unit if it is not performing as expected.

This process should only be used as a last resort troubleshooting step if you observe that your camera is not powering on properly (i.e. no noise on startup, constantly flashing white LED light) or the hotspot mode is not turning on properly. We highly recommend users open a ticket before trying this process to confirm this is the only solution for the issue you are experiencing.

Windows Users Mac Users
      1. Insert your microSD card from your Mevo Start into your computer.
      2. Click HERE to download the recovery zip file.
      3. Right-click the mevo_recovery.zip file and select "Extract All"
      4. Press Extract
      5. Press Next
      6. Drag the .mevo_start_recovery folder to your microSD card
        (Click here if you do not see the file!)
        excract_pc_opt.gif
      7. Remove the microSD card
      8. Make sure the Mevo camera is off, then insert the microSD into the camera and power it on.
      9. When the LED stops flashing, it will turn solid green.
        stationaryconnected.png
      10. When this happens. Press and hold the reset button on the bottom of the camera until the LED starts flashing, then release the button.
        Mevo_start_angle_up_1024x1024.png
      11. Your camera will be ready to use once the camera reboots, you should now see a blue light pulsing indicating you are now in Mevo Hotspot mode.
        apmodeon.gif


Troubleshooting Steps

Do you not see the .mevo_recovery folder?
If you do not see hidden files/folders you must enable this manually following the instructions below.
    1. Search "File Explorer Options" in Windows Search
      file_explorer.png
    2. Select "File Explorer Options" under Best Match
    3. In File Explorer Options press the "View" tab.
    4. Select option, "Show Hidden files, folders, and drives"
    5. Press "Apply"
hidden_file_pc_opt.gif
Still having an issue?
Please open a support ticket here so a Mevo Customer Experience Agent can address this for you.
Open Ticket
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.