The first accessory most people will need is some sort of a stand. We are happy to offer two great options, the Floor Stand and the Table Stand. Both are fantastic options fitting very different needs. Our Floor Stand is lightweight, secure, and compact.
What comes in the box?
- Tripod
- Swivel Mount Head
Setup
- Extend the Main Shaft
- Open the Legs
- Screw on the Swivel Mount Head to the top of the Main Shaft
Adjusting Tripod
- Unscrew each knob to loosen each section of the shaft
- Adjust the height as needed
- Tighten the knob to lock the shaft in place
Adjusting Swivel Mount Head
- Unscrew the knob to change the positioning angle of the Mount
- Tighten the knob to lock the Mount in position
What comes in the box?
- Stand Base
- Adjustable Main Stand
- Two Adjustable Shafts
- Swivel Ball Adapter
Setup
- Use the Allen wrench to loosen the Stand Base
- Insert the Main Stand into the Stand Base
- Tighten again using Allen wrench at the desired height
- Loosen the knob on the top of the Main Stand
- Insert the Silver Ball at the base of the Two Adjustable Shafts into the top of the Main Stand
- Tighten the knob on the Main Stand to secure the Two Adjustable Shafts
- Attach the Swivel Ball Adapter by loosening and then tightening the knob on the Adjustable Shaft
Adjusting
- Adjust the Main Stand height by unscrewing the top shaft to loosen the inner shaft
- Tighten to lock the Main Stand in place at desired height
- Unscrew each knob on the Adjustable Shafts to change their angle
- Tighten the knobs when the Adjustable Shafts are in the desired position
- Loosen the last Adjustable Shaft to move the Swivel Ball Adapter to the desired angle
- Double-check all the knobs are tight to ensure that your Table Stand is locked in-place
Troubleshooting Steps
Still having an issue?
Open Ticket