Mevo Wired and Wireless Webcam Mode (Beta)

As of July 27th, 2020, you can now use your Mevo as a web camera. This enables you to use any of your Mevo cameras with your favorite software. e.g. Video conferencing software such as Zoom, Google Meet, and Discord or Video Switching software like Livestream Studio, vMix, and OBS. The webcam feature is still in its early stages so you'll notice a some limitations but we can assure you we are working diligently to add features, functionality and compatibility across Mevo (Gen 1), Mevo Plus, and Mevo Start.

Please note that there are compatibility limitations with certain 3rd party software and specific Mevo models, so please read through the all of directions and limitations below before setting up your Mevo  as a web camera.

Zoom Pro-Tip - Enable HD and toggle Mirror

HD_and_Mirror.2020-08-14_14_06_41.gif

Wired Webcam (UVC) Wireless Webcam (Mac) Wireless Webcam (Windows)

UVC stands for "USB Video Class" which is a USB driver for cameras to be used via USB. This allows the Mevo Start to be used as a wired webcam. UVC functionality requires that Mevo Start is plugged in to your computer similar to how you would use a traditional webcam. Note that you will no longer be able to record or stream while using the Mevo Start as a wired webcam. No downloads are necessary.

Device Requirements

- Available for all Mevo (Mevo 1st Gen and Mevo Plus are limited at 480p and need external audio)
- Mevo app version 2.1 or newer
- Mevo Start firmware 1.1.62 or newer

How do I enable it?

  1. Connect your Mevo to the Mevo App to ensure you have the latest updates.

  2. Enable in Mevo App (demonstrated below)

    2020-08-28_16_17_27.2020-08-28_16_25_51.gif

  3. Plug it in via USB and your system will handle it all for you.

    Windows

    mceclip0.pngScreenshot_072220_111335_AM.jpg

    Mac

    No prompts are present. You can confirm your Mac system sees your Mevo Start by going to

         About This Mac > System Report > Camera

    Your Mevo Start will be listed there as a camera source.

  4. Select it as your video source in the app of your choice (example: Zoom)

    zoom_mevoweb.png

Platforms UVC has been tested with

  • Zoom
  • Google Meet
  • Skype
  • Slack
  • Cisco Webex
  • Microsoft Teams
  • FaceTime
  • Discord

Troubleshooting Steps

I don't see my Mevo + Mevo Boost when using wired webcam mode.
Mevo must be directly connected to your computer to use the Mevo as a webcam. This means you can't use your Mevo as a webcam when attached to the Mevo Boost.
Zoom only sees my audio, not my video or nothing at all?
Check that you are running the latest Zoom software version as they released an update to allow products to work with it including the Mevo.
My Mac has a USB-C port and it isn't detecting my Mevo Start
This is a known issue we are working on, currently the workaround is to simply flip and insert your USB-C cable or reinsert the cable until it is detected.
Still having an issue?
Please open a support ticket here so a Mevo Customer Experience Agent can address this for you.
Open Ticket
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

1 comment
  • why the mevo for windows is keeping too long?

     

    1

Please sign in to leave a comment.