Mounting Mevo Plus to a Stand or Tripod

Once you attach the Mevo to the included mount, you can attach it to most standard microphone stands or tripods using the adapter on the bottom of the mount.

First, remove the label from the bottom of the mount.


To remove the adapter, use a coin or a flat-head screwdriver and turn it counter-clockwise. 


One side of the adapter is a 1/4"-20 UNC tripod thread, and the other side is a larger 3/8"-16 microphone stand thread.


      1/4"-20 UNC tripod thread                   3/8"-16 microphone stand thread


The mount also has a built-in 5/8"-27 microphone stand thread.


Determine which thread fits your stand or tripod. If you need to use one of the threads on the adapter, ensure that the needed thread is on the bottom and screw it into the bottom of the mount until it is secure.

The Mevo Stand sold in the Mevo shop fits the built-in 5/8"-27 microphone stand thread on its own. If you're using the swivel mount included with the stand, attach the mount adapter to the Mevo mount with the 1/4" thread facing outward. 

Place the Mevo on top of your stand or tripod and turn it clockwise until it is secured.

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request



Article is closed for comments.