How Do I Change my Connection Type?

If you have already connected to your camera, you can go into settings to change your connection method.

Tap the More Options icon, then tap the gearwheel to enter settings.

iVBORw0KGgoAAAANSUhEUgAACzQAAAWkCAYAAACpB6VLAAAAAXNSR0IArs4c6QAAAAlwSFlzAAAL-2_22_copy.png

Tap Network.

2iVBORw0KGgoAAAANSUhEUgAACzQAAAWkCAYAAACpB6VLAAAAAXNSR0IArs4c6QAAAAlwSFlzAAAL-2_24.png
If you are using the Hotspot and wish to switch to a Wi-Fi network:

Your Settings > Network menu should look like this:

3iVBORw0KGgoAAAANSUhEUgAACzQAAAWkCAYAAACpB6VLAAAAAXNSR0IArs4c6QAAAAlwSFlzAAAL_9__1_.png

Tap Disconnect to change my Mevo Cameras Wi-Fi network.

The camera will automatically disconnect and update its status. After a moment, you can tap Configure Mevo and change to Local Wi-Fi, as detailed here.

If you wish to use a network you have used in the past, the camera and the app will remember it.

If you are on a Wi-Fi network and wish to switch to the cameras Hotspot:

The network settings menu should indicate that you are connected to a Wi-Fi network. Tap Disconnect to change Mevo's Wi-Fi network.

3iVBORw0KGgoAAAANSUhEUgAACzQAAAWkCAYAAACpB6VLAAAAAXNSR0IArs4c6QAAAAlwSFlzAAAL_9__1_.png

Your camera will disconnect from the app and update its status.

Then, tap Change Connection Type, to enter the Network Settings screen.

change_connection_type_copy.png
From here you will see different options. 
WI-FI / Cellular Data (if there is no Ethernet Connection)
wifi.png
Or WI-FI / Ethernet (If the Mevo Camera is already connected via wired Ethernet). 
Connected_to_ethernet.png
 
 

You can then connect to the Mevo Hotspot Mode per these instructions.

Was this article helpful?
4 out of 6 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.