The Mevo mobile app includes a network diagnostic tool that can measure how reliably your network connection can transfer data in the cameras current environment. Note: This is a test of the connection between the camera and mobile app only.
To access the tool, open Mevo app's settings menu and go to Network. Tap Network Diagnostic Tool.
You will see the following welcome screen. Read through the preparation steps, then tap Next in the bottom right corner.
When your ready to start testing, tap Start Test.
The camera will test your network five minutes. If you need to stop, tap Stop Test, although this will cause the results to be incomplete.
When the test completes, the app will report back on your network reliability. This indicates how successfully network packets were delivered from the camera to the mobile app using your current network setup. If your connection is not strong, improve your environment based on the recommendations provided to you by the app.
