Create a Presentation or Slideshow with Mevo

The Mevo 2.0 app supports the ability to import a slideshow as a PDF and present each slide seamlessly either as a fullscreen or over-the-shoulder graphic.

To access this feature, you must have the Mevo app version 2.5 or later (a subscription is no longer required). You will also need a supported microSD card inserted into your Mevo camera. You will also need a supported microSD card inserted into your Mevo camera.

Slideshows must be in PDF format and accessible from your mobile device's native Files application. This means the PDF can either be downloaded and stored into the Files app directly, or you can configure the Files app to also display documents stored in iCloud, Google Drive, Dropbox, Adobe Acrobat, or other file storing apps (provided those apps are also installed).

Mevo can support a maximum of 50 slides per PDF. You cannot edit the document once it is uploaded to Mevo, so be sure your presentation is complete prior to your event.

To load the presentation, tap the graphics icon in the lower right corner of the production screen.


Slideshows can be done via fullscreen or over-the-shoulder (OTS) graphics. Choose the overlay type you prefer (this example will use fullscreen).


Tap the Presentation icon.


Countdown puts a clock inside an overlay; learn more.

Tap Import PDF Slideshow.


Mevo will open the Files explorer. Find your slideshow PDF and tap it to select it. A preview will load in the following screen.


If you've selected the correct slideshow, tap the checkmark on the right side to upload it to your Mevo. If you selected the wrong slideshow, tap the preview to re-open the Files explorer.


The slideshow will take a moment to upload to your Mevo's microSD card (the larger your file, the longer it will take to upload). Once it has completed uploading, you can bring it into your production at any point while you are live.

Tap the slideshow to select it.


You will see a preview of what it will look like to your viewers. By default it will start on the first slide, but you can adjust which slide to start on by tapping the arrows in the bottom left corner.

To proceed with overlaying the slideshow and presenting it to your audience, tap the checkmark in the lower right corner.


You will now see your live production screen; notice the output preview (upper right) is showing the fullscreen overlay of the slideshow. You can control the slideshow from the app by using the direction arrows on the bottom of the screen.


You can also tap the slides icon to pop open the slideshow at the bottom of the screen and custom choose which slide to display.


When you no longer wish to display the slideshow, tap the graphics icon in the bottom right corner of the live production screen, then tap the red delete icon over the graphics preview.

You can also switch overlay types here. For example, to switch from a fullscreen to an OTS slideshow, tap one of the OTS placeholders to move the slideshow, then tap the checkmark that appears in the lower right corner to proceed.


Once the slideshow preview is gone, tap the checkmark on the bottom right corner to proceed with removing the overlay from your live production.

Was this article helpful?
19 out of 20 found this helpful
Have more questions? Submit a request



Article is closed for comments.